How To Regrip Your Pickleball Paddle (Step by Step Tutorial)

How To Regrip Your Pickleball Paddle (Step by Step Tutorial)

Skip ahead to 6:30 if you want to just watch the wrapping part.

Re-gripping your pickleball paddle can be a daunting task. In this video, I’m going to talk to you about pickleball paddle grips and show you how to over-grip your paddle.

If you want to see more on this topic, go here: https://pickleballkitchen.com/changegrip

For more, go to pickleballkitchen.com

12 Comments

  1. Lucy Mejias on November 14, 2021 at 9:08 pm

    Have you ever taken off the original grip of a paddle.

  2. Giovanni Ciriani on November 14, 2021 at 9:09 pm

    Correction: I didn’t watch closely, I did start from the correct side of the tapered end. —
    Superseded comment:
    When you start wrapping the tape, it seems to me the tapering should be positioned the other way, with the inclined part at the end of the handle. You do the opposite. If you started as I just described, then you would not need to change the inclination of the tape.

  3. Colette Descent on November 14, 2021 at 9:13 pm

    Excellent video Barrett, thank you. I have a quick question for you: the grip size of my paddle is 4 1/4. If I remove the original manufacturer’s grip wrap and regrip it with new tape, will it help in reducing the grip size? (4 1/4 is a bit big for my hand) I’m trying to make the grip smaller.

  4. Benjamin Leavitt on November 14, 2021 at 9:23 pm

    Affiliate links to over grips?

  5. Vincent Hayes on November 14, 2021 at 9:24 pm

    Thank you.
    Your instructions were perfect.
    Vincent

  6. K Hop on November 14, 2021 at 9:26 pm

    Success!! Thanks for your help, especially the trimming tip at the end, very helpful.

  7. Enuf Ots on November 14, 2021 at 9:29 pm

    I’m just about ready to order my 1st Pickleball paddle and my last consideration is grip size. The paddle comes with a standard 4 1/4" size grip and I had played with some loaners from friends which I believe were using a standard size grip. I researched grip sizes on the Internet and found 3 ways to determine your grip size: 1) hold the paddle and see if there is a snug fit when you insert your other hands index finger between your fingertip & palm, 2) measure the distance between the middle crease in your palm to the tip of the ring finger, and 3) by height which is 5’9" and above should use a 4 1/2" grip. By all three methods, i should be using a 4 1/2" grip but I’m afraid this overgrip will increase the grip size. Should i buy the 4 1/4" ( been using this size from loaners anyways) and if i decide to overgrip it than it won’t be an issue with it being too big? Anyone having this problem?

  8. Natalie H on November 14, 2021 at 9:49 pm

    What do you if the original grip is coming loose?

  9. Debbie Stevens-Sears on November 14, 2021 at 9:53 pm

    very helpful. thanks!

  10. dan finley on November 14, 2021 at 9:53 pm

    Good information, however I was looking for a video of actually "re gripping" the paddle. Do you have anything like that where you remove the factory grip and re-grip with a new one? I’m not a real fan of the over-grip mainly because my hands aren’t that big and I like to keep the overall grip size as small as I can.

  11. Wilson C on November 14, 2021 at 9:54 pm

    You have abnormally symmetrical/uniform and beautiful eyelashes.

    Also, your video was helpful, thanks!

  12. jdcrowe75 on November 14, 2021 at 9:57 pm

    You didn’t regrip… you over gripped.

Leave a Comment